Quick Guide
There’s nothing worse than tasting burnt vapes. So, in this guide, we’ve listed 8 of the top causes of burnt rechargeable vapes to help restore your enjoyment of nicotine.
- Low e-liquid
- High wattage
- No prime coils
- Old or scorched coils
- Chain vaping
- Wrong use of e-liquid
- Clogged wick
- Wrong battery
Besides, we also provide you with targeted solutions. Now, let’s discuss it together!
Introduction
Rechargeable vape burning is common, so there is no need to feel stressed.
There are many reasons for the burning of rechargeable vapes, such as insufficient nicotine, counterfeit products and so on.
At disposable vape Global, we offer a wide range of high quality, large liquid capacity rechargeable vapes that you can use as your alternative.
However, in the following, we will walk you through the 8 main reasons that cause rechargeable vapes to burn. In this process, you can comprehensively examine your vape in turn.
Why Does My Rechargeable Disposable Vape Taste Burnt?
Rechargeable vapes, like disposable vapes, are burnt for the following 8 main reasons:
- Low e-liquid
When the e-liquid is exhausted, there is not enough liquid on the wick to soak, and the device has no liquid to evaporate. It’s easy for the rechargeable vape to burn.
- High wattage
High-power vaping will cause the rapid depletion of e-liquid, which will cause the wick to burn.
- No prime coils
If the coil is not properly soaked when the device is first used, the wick tends to dry out, causing the coil to be heated directly with the cotton.
- Old or scorched coils
Long-term use of old or scorched coils will wear down the wick, causing you to taste the burnt taste of the vape frequently.
- Chain vaping
When you take several puffs of a rechargeable vape in a row, you don’t leave the wick enough time to soak in the liquid, causing it to dry out and burn.
- Wrong use of e-liquid
Not all e-liquids are compatible with your device, and if the wrong ratio of VG to PG is used, the coil can be damaged, causing the vape to burn.
- Clogged wick
Frequent use of juices rich in colours, nicotine, or sweeteners may clog the wick. When the device is turned on, the wick overheats and burns.
- Wrong battery
The coil can easily burn when a high-powered battery is connected to a vape tank with moderate power requirements.
How To Fix A Burnt Rechargeable Vape?
Keeping an eye on the consumption of e-liquids can help prevent vaping from burning. However, not all vapes can be directly seen in the vape tank. Here are two scenarios:
- Rechargeable vape IGET B5000: With a frosted opaque design, it can be judged by the vapour and flavour to determine the remaining amount of liquid.
- Disposable vape IGET Hot: A semitransparent vape tank lets you see the remaining e-liquid directly. At this time, you only need to check the tank regularly.
Proper priming of coils is an effective way to extend the lifespand of coils. The specific steps are as follows:
- Open the vape and remove the coil.
- Drop a few drops of liquid directly into the hole at the top of the coil to moisten the coil and wick, noting that only two or three drops are needed.
- Add a drop of liquid to each juice hole around the coil.
- Reassemble the vape.
- Take a few dry hits by drawing on your vape without starting the device, but try not to go more than five times.
- Wait 10 to 15 minutes for the wick to soak in the e-liquid fully.
When selecting e-liquid for the device, paying special attention to the VG and PG content in the main liquid is necessary, as this directly determines the liquid’s viscosity.
In general, if you use a vape pen or a high resistance coil (1ohm+), choose 50/50 e-liquid or nicotine salt.
However, choosing liquids with a high VG content is recommended if you use a low-resistance coil.
Short periods of frequent vaping will make your vape easy to burn. Allow 15 to 20 seconds between each puff so the wick can absorb enough e-liquid.
When the device overheats due to continuous vaping, set it aside and wait at least 15 seconds before continuing to use it.
Coil life is limited. A coil can last 1 to 2 weeks for the average vape user. Therefore, it is important to change the coils regularly to ensure the best vapour and flavour experience.
All you need to do is remove the worn coil, dispose of it, and install a new coil. However, exactly how you do this depends on the structure of your vape tank.
Cleaning coils and wicks are a great way to extend the life of your vaping device, but not all coils can be cleaned.
The coil is designed to be non-removable for single-use vapes like the IGET XXL.
But for some disposable vapes that can be removed, we can gently wipe off the residue in the coil and wick it with a cotton swab soaked in rubbing alcohol.
To prevent the coil from burning due to too high a power setting, we recommend starting with lower power or wattage and slowly increasing it until you find the optimal level.
However, if you are unsure of the wattage range the coil can handle, you can check your vape’s packaging or look for a message printed on the side of the coil.
As a rule of thumb, if the coil resistance is higher than 1.0 ohms, the wattage should be between 10w and 16w, and if it is lower than 1.0 ohms, the optimal power will be between 18w and 50w.
However, it is only a rough calculation, depending on the wattage range the coil can withstand.
Not all batteries are compatible with your vaping device, so choosing the right one can effectively prevent the vape from burning.
If you have a high-power vape, do not choose a vape tank with moderate power requirements. Instead, you should match it to a vape tank with a high power requirement.
Why Does My Rechargeable Vape Taste Burnt After Charging?
After charging, the burning taste of rechargeable vapes is mainly related to overheating the device or coil. Because when the battery is charged, the heating element is also activated.
Therefore, during the charging process, the temperature of the vaping device will also rise.
So when you unplug the charger after charging, the voltage inside the battery will quickly reach its highest level, burning the coil due to overheating.
Why Does My Vape Taste Burnt With New Coil?
The following two reasons mainly cause new coil burning:
- The coil exceeded the recommended wattage, directly heating the cotton and causing it to dry burn.
- When using the new coil, it is not primed sufficiently.
Why Does My Vape Taste Bad But Not Burnt?
- The e-liquid is running low but not completely exhausted.
- Use inferior e-liquids.
- Use the same coil for a long time without replacing it.
- There is no regular cleaning of residues around the coil and wick.
Why Does My Coil Taste Burnt After 2 Days?
- You are using sweetened e-liquid. E-liquid high in sweeteners can cause caramelization on your coils, leading to a burnt taste and faster coil burnout.
- The wattage of the vape is set too high, causing the coil to heat up too quickly.
Verdict
Now, you should know why your rechargeable vape tastes burnt and how to fix it. But if all the fixes above fail, your vape has reached the end of its life. It’s time to buy another one.
Alternatively, you can browse our VapePenZone online store, which has a wide selection of high-quality disposable vapes for everything you need.
FAQ About Why Does My Rechargeable Vape Taste Burnt
Is it bad to smoke a burnt vape?
We can’t smoke a burnt vape. A burnt vape has the potential to produce harmful chemicals, such as formaldehyde, acetaldehyde and acrolein, which pose a serious threat to the health of our lungs.
How do you fix a burnt coil on a rechargeable vape?
Here are the steps to repair a burned coil in a rechargeable vape:
- Remove the coil from the vaping device.
- Use a paper towel to remove excess e-liquid from the coil, then clean the coil with warm water for a few minutes.
- Use a paper towel or hair dryer to wipe the moisture from the main coil and ensure that the coil is completely dry.
- Put a few drops of e-liquid into the centre hole at the top of the coil and let the wick soak thoroughly for 10 to 15 minutes.
- Place the coil back into the device and take a few dry hits several times without starting the device.
- Start with a low wattage and slowly increase to the ideal wattage.